LNG

Hot water is one of the biggest quiet costs in an Australian home. It makes up around a fifth of the average household's energy use, and most of us only think about it when the shower runs cold. If your system is getting old, or you are tired of rising gas and electricity bills, the question is the same: stick with what you have, or switch?

Across Perth, heat pump hot water systems are now the option homeowners ask about most. Here is a plain English look at how they compare with gas and conventional electric systems, what rebates actually exist in Western Australia, and what to check before you spend a cent.

Why heat pumps keep coming up

A heat pump works a bit like a fridge in reverse. It pulls warmth from the surrounding air and uses it to heat the water in the tank. Because it moves heat instead of creating it from scratch, it can use up to around 75 per cent less electricity than a conventional electric system. Perth's mild, sunny climate suits that process well, since the outdoor air is warm for much of the year.

What about gas?

Gas storage and gas continuous flow systems are still common across Perth, and they remain a sound choice for many households, particularly if you are already connected to mains gas and your current unit is working well. Continuous flow never runs out of hot water, which suits larger families with back to back showers.

The trade off is the ongoing supply charge and a fuel price you do not control. If you are replacing a gas system, it pays to compare the full running cost over ten years, not just the purchase price on the quote.

Rebates in WA: what is actually available

The main incentive is federal. Small-scale Technology Certificates (STCs) are created when an eligible heat pump or solar hot water system is installed, and your installer normally passes the value on as a discount on the invoice. For a heat pump in Perth, estimates commonly land between about $800 and $1,200, depending on the model and its efficiency rating.

Western Australia does not currently run a state wide cash rebate for most households on top of the STC discount, which is different to Victoria. Some local councils have offered their own sustainability rebates that include hot water heat pumps, so it is worth checking with yours. These figures move around from year to year, so confirm the current amount with your installer before you commit.

Questions to ask before you switch

 

  • Where will the unit go? Heat pumps need good airflow and make a low hum, so placement away from bedroom windows matters.
  • Do you have solar panels? Running the heat pump through the middle of the day lets you heat water with your own power.
  • Are you keeping your gas connection? Going fully electric can remove the gas supply charge, but a licensed gas plumber needs to disconnect and cap the old line safely.
  • What size do you need? A family of four needs a bigger tank than a couple, and an oversized system wastes energy.
  • Is it compliant? Make sure the unit carries the right certification and that a tempering valve is fitted so the water at your taps is a safe temperature.

 

Keep the system you have running well

Whatever you choose, a little maintenance goes a long way. Storage systems commonly last somewhere around 8 to 12 years, and a well looked after heat pump can run a little longer.

  • Test the pressure relief valve about every six months by briefly lifting the lever. A short trickle is normal. A constant drip is not.
  • Keep stored water at 60 degrees or above, which is the Australian standard for stopping bacteria such as Legionella growing in the tank. The tempering valve then brings the temperature down for safe delivery to your taps.
  • Watch for warning signs: rusty or discoloured hot water, rumbling or banging noises, water pooling around the base, or a system that runs out faster than it used to.
  • Get an older system checked before it fails. Replacing it on your own timeline beats a cold shower and an after hours call out.

 

Why late spring and summer is a good time to plan

Perth summers are tough on power bills, but we generally use less hot water when the weather is warm. That makes the months ahead a practical window to replace a tired system without the pressure of a winter breakdown. Heat pumps also run efficiently in warm air, so you start saving straight away.

So, which should you choose?

There is no single right answer, but here is a simple way to think about it. A heat pump is usually the better pick if you want lower running costs, you can claim the STC discount, and you have solar or plan to add it. Gas can still make sense if your existing mains gas system is in good shape and you value an endless supply of hot water. Either way, get quotes for both and ask for the running costs in writing so you can compare properly.

If you are weighing up a replacement, the team at Plumbdog can talk you through the options for your home and install your new system properly, including the gas work when a changeover is involved. Have a look at our Plumbdog Hot Water Systems Perth page or get in touch for a quote.

LNG

LNG.com.au enables businesses to keep up to date with events and the people in the LNG industry